Search in uioop.blogspot.com

Tuesday, October 23, 2012

How to Change the Priority of Wired/Wireless Network Cards in Windows


How to See the Current Network Card Priority

You’ll need to open up a new command prompt window and type in the following command:
netstat -rn | more
The | more part of the command will make sure that it doesn’t go flying off the screen, requiring you to scroll backwards—speaking of which, you should read our article abouthow to scroll backwards in the command prompt with the keyboard.
image
At the top of the output you’ll see the Interface List, and the column on the left-hand side shows the metric of the interface. You’ll notice that the loopback interface has the highest priority, followed by my wired Gigabit card, and then my wireless card.
If you’re wondering what all the other cards in the list are about, I’ve got some VPN software loaded, as well as VMware Workstation, all of which create virtual adapters that show up in the list.

How to Change the Network Card Priority

To change the priority, head into Network and Sharing Center and click on the Change adapter settings link on the left-hand side—or you can quickly open the network connections list by typing ncpa.cpl into the Start Menu search box.
Now that we’re in here, choose the network card that you want to change the priority for, right-click it, and choose Properties from the menu.
Now select the Internet Protocol Version 4 item in the list, and click the Properties button.
Now click the Advanced button at the bottom of this window…. getting tired of clicking yet?
And now, finally, we’re at the place where you can make the change. Uncheck the box for Automatic Metric, and then type a number into the Interface Metric textbox. You can consult the list that we found in the command prompt earlier to know what metric to assign—you’ll probably want to assign it something higher than 1, since that’s used for the loopback adapter.
You may want to go ahead and change the priority for your other card as well, just to be sure that it is assigned the proper priority.

Thursday, October 11, 2012

How to enable HP Smart Array B110i SATA RAID Controller in BIOS


HP ProLiant 100 Series servers
To enable the controller and set boot order:
  1. Power up the server.
  2. When prompted during the start-up sequence, access RBSU by pressing the F10 key.
  3. Select Advanced or Advanced Settings.
  4. Select SATA Configuration or Hard Drive Configuration or IDE Configuration.
  5. Change SATA #1 to RAID.
  6. Return to the previous screen by pressing the Escape key.
  7. Select the Boot Menu by pressing the right arrow key.
  8. Select Hard Disk Drives.
  9. To assign the HP Smart Array B110i SATA RAID Controller as the boot controller, set Ctrl 1 toHP Smart Array B110i SATA RAID Controller.
  10. Press the F10 key to save the setting and to exit RBSU.

HP ProLiant 200 and 300 Series servers
To enable the controller and set boot order:
  1. Power up the server.
  2. When prompted during the start-up sequence, access RBSU by pressing the F9 key.
  3. Select Advanced Settings.
  4. Select Embedded SATA RAID.
  5. Select Enabled.
  6. Return to the previous screen by pressing the Escape key.
  7. Select Boot Controller Order.
  8. To assign the HP Smart Array B110i SATA RAID Controller as the boot controller, set Ctrl 1 toHP Smart Array B110i SATA RAID Controller.
  9. Press the F10 key to save the settings and to exit RBSU.

AVG Internet Security 2013

Total Pageviews

Contributors